This is a great value! These kits ensure that you'll get the job done right. Each kit includes an Edelbrock intake manifold, quality intake bolts, intake gaskets, carb gaskets, a tube of blue gasket sealer and we also throw in a set of carburetor studs. Designed for 1965-79 street 326-455ci Pontiac V8s (except Ram Air V and 265/301 V8's). Provides great throttle response for performance you can feel. This intake manifold is a stock replacement/street legal part for 326, 350, 389, 400 and 455ci V8's with OEM 4-bbl. carb 1966-72 (1973 non-CA) except stock equipped EGR. (Intake manifold p/n 350-3756 is a stock replacement/street legal part for 326, 350, 389, 400 and 455ci V8's with OEM 4-bbl carb. 1973-79 with EGR.)
Installation Notes:
Port exit dimensions: 1.06'' x 1.92''Manifold height: (A) 5.50'' , (B) 6.60''
Click here to determine carburetor pad height. Recommended intake gasket is Fel-Pro p/n 375-1233For 1968-71 use p/n 350-8015 throttle bracket For Trans-Am use OEM 4-bbl carb for Shaker Hood clearance.Choke plate included. HEI will clearCarburetor Recommendations:
OEM 4-bbl. carburetor
carb will work with non-EGR systemcarb has provision for evaporative canistercarb acceptable to factory cruise controlEdelbrock Performer 600cfm Carburetor p/n 350-1405,
Edelbrock Performer 750cfm Carburetor p/n 350-1407
Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805,
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.
carb will work with non-EGR system carb has no provision for evaporative canister, carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kitcarb has manual choke only.use square-bore to spread-bore carburetor adapter plate p/n 350-2732Edelbrock Performer 600cfm Carburetor p/n 350-1406,
Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806
carb will work with non-EGR system carb has no provision for evaporative canister,use square-bore to spread-bore carburetor adapter plate p/n 350-2732Edelbrock Performer 750cfm Carburetor p/n 350-1411.
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.
carb will work with non-EGR system carb has no provision for evaporative canister, carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kituse square-bore to spread-bore carburetor adapter plate p/n 350-2732
VIEW CART
){kind=link}